The machine is designed as a single-purpose piece of equipment for clean rooms in semiconductor industry. The machine provides jet etching, washing and edge drying of silicon wafers for power switches. The equipment consists of two chambers with controlled flow of the...
clean rooms
High precision punching and laser welding
The task of the device is to cut a ring of approximately 1 mm in diameter from a special foil, to place it and to weld it precisely to the centre of a small hole in a moulded plastic part. Everything takes place on a very compact top view of the equipment wherein two...
Table tampo-print 360°
The table tampo-print 360° is a minor single-purpose device for printing catheters which are used in the health service. Catheters are loaded manually into the bed under a transparent cover. The ink is transferred on the catheter using a swab which subsequently rolls...
Machine for Si-wafers processing
Is a space-saving device designed for cleaning and etching of the silicon wafers. Device Features: Used materials comply with the FM4910 standards Etching and rinsing bath. One to three storage positions. Fully automated; Automatic transport of the Si-wafers to the...
Pin welder and stamper
The equipment is a manned automatic workstation designed to manufacture an intermediate product which is used in healthcare. Incoming material is represented by a pouch welded from a foil and a plastic pin is welded into the pouch by the equipment and the equipment...
Conveyors to clean rooms with an air draught barrier
The assembly is composed of three follow-up conveyors and is used for automatic transport of products from clean manufacturing rooms into the rooms for packaging. The conveyors number 1 and 2 are located in clean rooms and the output conveyor number 3 is located in an...
Catheter Connector Automation
The equipment is used for fully automated assembly of the Epifuse Catheter Connector. The assembly is a product for medical purposes and consists of two parts: Body and Cap. There are several versions of parts which are used for the assembly and presence of proper...
Ingot cleaning line
The automatic equipment is used to etch and clean monocrystalline silicon ingots in the semiconductors manufacturing. Individual ingots of cylindrical shape are placed in a basket on the incoming conveyor belt. Having the cover of the incoming conveyor belt been...
Manual Cleaning Line for Wafers Etching
The equipment is a chemical box to clean and etch monocrystal silicon wafers in the chemical SC-1 and in hydrofluoric acid. The operator places baskets with silicon wafers of diameter equal to 4 up to 8“ into individual tubs. Having the required etching time been...
Chemical Boxes AWAP For HF Mixtures
The equipment is designed to etch Si plates in manufacture of semiconductors. It is designed as a stand-alone chemical box. The etching is done by means of chemicals based on hydrofluoric acid. All materials used are chemically resistant and they meet the requirements...
Automatic Box for Microstrip
The machine is designed as a single-purpose automatic box to etch Si plates. The cycle of etching and rinsing the Si plates is fully automatic according to the selected parameters, the operator only replenishes the incoming material, takes products and selects the...
Automatic Line for Etching Chips
The equipment is a set of four chemical sections interconnected in a manufacturing line. The line makes it possible to carry out an automatic comprehensive chemical procedure on wafers from monocrystalline silicon. The procedure typically consists of etching sequences...
TMAH
Zařízení je určeno pro ředění a distribuci chemikálie TMAH. Výsledná směs TMAH 2,38% je tvořena mícháním Tetramethylammonium hydroxidu (TMAH 25%) a deionizované vody (DI voda). Systém se skládá z vnitřní míchací smyčky a distribuce. (zařízení pracuje v ČR pro...
Lord Automation
The machine is designed as a single-purpose automatic piece of equipment to manufacture medical consumable material. The machine assembles and tests a special product named "Loss of resistance device - syringe", similar to a syringe. The following processes take...
Spin Etcher
References on request
Gas pouch filling machine
The machine for filling aluminium pouches with gas and for their subsequent welding in the manufacture of medical consumable material is designed as a single-purpose, semiautomatic, permanently manned machine. The working process is managed by means of a Programmable...
U-cell
The equipment is used in the manufacture of medical consumable material as a single-purpose service workplace for the stand-alone machine Cassette Welder. The equipment is formed by three work desks which form a U-shaped production line and the equipment is...
Cassette Welder
The cassette welder is a single-purpose machine. It is used to weld a plastic lid with a cassette where solutions for blood analyser are placed. The machine is designed as a semiautomatic permanently manned machine. The operator places the cassette with a plastic...
A machine to etch facets of wafers in a column
The machine is used to etch facets of semiconductor wafers (up do the diameter of 4“) with a mixture of nitric acid, hydrofluoric acid and acetic acid. After the etching process is over, the wafers are rinsed in a triple upstream cascade with demineralised water and...
Machine for preparation and distribution of NH4OH + DIW
This machine is designed for automatically controlled mixing of NH4OH and deionised water. The result is ammonia solution with conductivity of the preset level. This solution is stored in 200l tank and delivered to the circulation loop to supply other machines in...
A hood for acids
The equipment is used as laboratory box to work with aggressive chemicals. The main part is represented with a working area with a chemically resistant polypropylene worktop and with illumination. The worktop contains three sinks, each is connected to an independent...
Ingot handling system
Ingot handling system is a complex device for cleaning, temperation and transportation of silicon ingots. The input part of the device is a tilter, wich is where the edges of ingots are blunted and cleaned. The tilter system allows the operator to manipulate the ingot...
Degreasing drying machine
The machine is designed for degreasing and drying of aluminium foils in semiconductor industry. Degreasing is done in several baths with toluene acetone and ethanol with support of ultrasound for increased efficiency of the cleaning. At the end of the process the...
After lapping cleaning line
The machine is designed for cleaning silicon wafers up to 8" in diameter after lapping process. Maintenance inserts silicon wafers in the carrier into handling basket in the first input two-position bath with water. By two axis manipulator is basket than shifted...
Tube etching line
Compact device designed for etching of the quartz (silica glass) tubes in a hydrofluoric acid and subsequent washing in a demi-water. Device Features: Processed tube diameter up to 300mm and tube length up to 2450mm Built-in sprays (washing system) Workplace...
Box for Washing Canisters and Shipping Boxes
The device is designed to wash the canisters and shipping boxes from Spraying chemicals DI water from the inner and outer parts. The equipment is used for the needs of the semiconductor industry. Skeleton device is made of white polypropylene. (The equipment is used...
Jet etching machine
The machine is designed for etching of the edges of the silicon wafers and following proceses of rinsing and drying. Etching and rinsing is done by jets with optional position and angle to the wafer. After manual insertion the wafers are automatically centered on the...
Automatic Tube Etching Machine
The device is designed for cleaning and washing of the semiconductor tubes and other small parts in the semiconductor industry. You can etch into the tube diameter of 300 mm and a length of 1450-2765 mm. Manipulator situates tube on a rotating cylinders (roller beam)....
Cleaning and Etching of the Sapphire Wafers
The equipment is designed for use in the optoelectronic industry and to operate in clean rooms. Chemical cabinet is used for washing and etching sapphire wafers by chemical solutions in the baths. A diameter of the wafer can be 2"- 8". Wafers are stored in PFA...
Machine for tubing coils production
The automatic machine has been designed for the production of tubing coils made of different materials. The set involve a self-adhesive paper tape for coils fixation. At the coils can be set the length of tubing, the size of the rolls, number of turns, length and...
Chemicals distribution boxes
Boxes are designed specifically for automated distribution of extra pure chemicals in the semiconductor industry, such as H2SO4, HF, HCl, NH4OH, H2O2, HNO3, etc. Electric equipment, software, pneumatics valves, connectors and connection points of chemicals allows...
Ingot etching line
Designed for fully automatic cleaning of silicon monocrystals. Device Features: Processing of one or two ingots with a total weight up to 30 kg Input and output conveyor with handling baskets, two-axis manipulator Barcode reader of a loaded batch Three process baths:...
Pump Station for Acids
An automatic device is used as a storage tank and a distribution box for three different kinds of acids in semiconductor purity and for demineralised water. Each acid in the box has its own storage tank and the device is able to distribute a mixture of acids into the...
Distribution system DS1000
The equipment is an automatic supply unit of a distribution system for clean chemicals, especially for the semiconductor industry. The structure of the distribution cabinet makes is possible to connect two high-capacity storage tanks of chemicals from both lateral...
Mixing and distribution equipment for developer
The equipment is used to prepare, store and distribute a solution of process developer. It is formed by an assembly of three stand-alone units: a distribution cabinet, an external standstill for a 200-litre barrel and a high-capacity tank for a mixture of the...
Chemical line for etching silicon wafers
The equipment is used for an automatic process of etching and cleaning small Si-wafers for research tasks in various process chemicals. The operator will prepare loads of etching baths and will place the baskets with silicon substrates sized 2" in positions for...
Acid Bench Etching
The equipment is an automatic chemical line designed for manufacture of semiconductors and is used for the technological process which consists in etching Si-wafers with a mixture of acids. The operator will place a basket with silicon substrates sized 8" into a...
Membrane Unit Welding Machine
The equipment is designed as a single-purpose automatic line to assembly the Membrane Unit with a Desiccant Disc into a Well. The Well is subsequently closed with a welded-on aluminium cover foil and labelled with a type indication label. The equipment is designed as...
Punch and Weld Machine
The equipment is designed as a single-purpose automatic line to punch out rings from a very thin membrane and to weld them on by means of ultrasound in two different plastic parts - on the tip of the jacket (Jacket) and on the lid (Guiding Lid). The required shape of...
Dispenser assembly automation
The equipment is designed as a single-purpose automatic line to manufacture the healthcare aid GUIDE WIRE DISPENSER. Assembling of the product consists in inserting the wire into polyethylene tubes of various lengths and fitting the assembly with a group of other...